Case of four Aeroshell 5 3kg (6.6lb) cans.

Red Hot. Not being produced for quite some time due to factory fire. For sale is a case of four Aeroshell 5 3kg (6.6lb) cans. I also have a listing for single cans. 2 years left on Shell's 6 year shelf life. I opened a can to check condition of grease and looks perfect with no noticeable settling or separation. Free expedited shipping. 

Typical Physical Characteristics These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur. Technical Data Sheet AeroShell Grease 5 AeroShell Grease 5 is a high temperature grease composed of a mineral oil thickened with Microgel®, possessing good load-carrying ability. It is inhibited against oxidation and corrosion and has excellent resistance to water. The useful operating temperature range is –230C to +1770C. Main Applications AeroShell Grease 5 is particularly effective for use as a wheel bearing grease, especially when landing speeds are high, and is suitable for the lubrication of aircraft and engine accessories operating at high speeds and at relatively high temperatures, e.g. magnetos, generators and starters. For the lubrication of rolling bearings which are required to start at temperatures as low as –230C an adequate period should be allowed for the grease to channel. · Specifications, Approvals & Recommendations U.S. : Meets MIL -G- 3545C (Obsolete) · British : Meets DTD.878A (Obsolete) · French : Equivalent DCSEA 359/A · NATO Code : G-359 (Obsolete) · Joint Service Designation : XG-277 (Obsolete) · For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk. Properties MIL-G-3545C Typical Oil type - Mineral Thickener type - Microgel Base Oil viscosity @400C mm2 /s - 500 to 525 Base Oil viscosity @1000C mm2 /s - 32 Useful operating temperature range 0C - -23 to +177 Drop point 0C 177 min 260+ Worked penetration @250C 250 to 300 284 Unworked penetration @250C - 281 Bomb Oxidation pressure drop 100 hrs @990C lb/in2 10 max 6 Bomb Oxidation pressure drop 500 hrs @990C lb/in2 25 max 15 Oil separation 30 hrs @1000C % m 5 max 0.5 Water resistance test loss @410C % m 20 max 0.5 Evaporation loss 22 hrs @1490C % m - 1 Mean Hertz Load kg - 37 Copper corrosion 24 hrs @1000C Must pass Passes Bearing protection 2 days @510C Must pass Passes Anti-friction bearing performance @1490C hrs - 600+ Colour - Amber Page 1 of 2 AeroShell Grease 5, v 1.1 12.03.2016.23.09 Health, Safety & Environment Health and Safety · Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/ Protect the Environment · Take used oil to an authorised collection point. Do not discharge into drains, soil or water. Additional Information Advice · Advice on applications not covered here may be obtained from your Shell representative. Page 2 of 2 AeroShell Grease 5, v 1.1 12.03.2016.23.09 Visit SCL http://shop.sclubricants.com/aeroshell-grease-5